Conveyors

AUTOMATIC ELECTRONIC UNLOADER

Features

1. It can automatically dock with AGV, and actually unmanned Magazine.
2. The material box baffle is automatically opened and closed to facilitate AGV docking.
3, With standard dual track SMEMA, single dual track line body general.
4. Standard Ethernet port can be connected to the workshop network to realize the Internet of Things.
5. With AGV automatic docking function.
6. Hermes9852 and CFX networking functions (on-site docking and debugging software is required).
7. The strength may be adjusted through the man-machine interface to prevent the failure.
8. All motor speed regulation is digitally integrated in the man-machine interface.
9. The origin of the bin is set along with the formula to adapt to different types of the bin.
10. The material box is equipped with a plate detection sensor in the box, and the board is not fully checked into the box.
11. Use darkpages for all inspection doors and windows

Technical parameters

• Overall dimensions: L500 W980* H1080mm
• Transfer time: less than 6 seconds
• Substrate size: L330 W255,0.8-4.0mm thick
• Transmission device: 80-255mm automatic widening, anti-static belt, load plate edge distance within 3mm •
• Communication mode: SMEMA, Ethernet, RS232, Hermes9852, and CFX
• Transfer direction: one-click switch
• Power supply: AC220V,50/60Hz,0.35KW